How to Get Gorilla Glue Off Quartz Countertop


Gorilla Glue is incredibly strong and durable, which makes it great for bonding materials together. However, this strength becomes problematic when the glue gets on surfaces where it’s not supposed to be. Quartz countertops are beautiful and popular options for kitchens and bathrooms, but their surfaces are not impervious to sticky messes. If you’ve accidentally gotten Gorilla Glue on your quartz countertops, not to worry – it can be removed with a little patience and the right techniques.

Act Quickly for Best Results

The key is to act as soon as you notice the spill. Gorilla Glue bonds quickly and becomes much harder to remove once it has cured. Try to remove any wet glue immediately by gently scraping with a plastic putty knife. Avoid using metal scrapers or knives since these can scratch the quartz.

If the glue has already dried, don’t panic. It just may take a little more effort and patience to gently break the bond. The good news is that with quartz being an engineered stone, the glue is only adhering to the surface layer. With some work, you can break this bond without damaging the countertop.

Use Gentle Solvents

Many household solvents can be used to soften Gorilla Glue on quartz:

  • Rubbing alcohol: Apply a small amount of rubbing alcohol directly onto the glue spot. Let it soak for 5-10 minutes, reapplying as needed. This should slowly soften the glue. Gently scrape with a plastic putty knife. The alcohol helps dissolve the bonds.
  • Acetone nail polish remover: Use 100% pure acetone without additives. Apply a small amount directly onto the dried glue, let soak, and gently scrape. The acetone breaks down the glue.
  • WD-40: Spray a light coat of WD-40 onto the glue and let it penetrate for 10-15 minutes. The lubricant helps separate the glue from the quartz surface. Scrape off and wipe clean.
  • Goo Gone: This mild citrus-based cleaner helps dissolve adhesives. Apply it to the glue spot, let it soak in for a few minutes, and gently scrape.

Use Warm Soapy Water

For dried glue spots, try pouring warm soapy water directly onto the area. Use a few drops of dish soap in warm water. Let the spot soak for 5-10 minutes, then scrape with a plastic putty knife. The heat and soap help loosen the bond.

You can also try letting a warm, wet rag rest on top of the glue spot for 10 minutes. The moisture and heat will soften the glue, allowing you to gently scrape it off. Just take care to avoid excess water seeping into seams and edges.

Scrape Gently With Plastic

Once you’ve softened the glue with solvents, warm water, or soaking, it’s time to gently scrape. It’s crucial to use a plastic scraper, old credit card, or plastic putty knife. Metal scrapers will scratch and damage the finish.

Carefully scrape at the glue, applying light pressure. Take your time and gradually work at it rather than trying to remove all at once. Patience is key. If needed, reapply solvent or water and let soak again before gently scraping more.

With consistent, gentle effort, you will slowly pry up the glue as you break the surface-level bonds it formed with the quartz.

Use Baking Soda or Toothpaste as Abrasives

If any glue residue remains after scraping, try using baking soda or toothpaste as a gentle abrasive polish. Make a paste of baking soda and water, apply to the area, let sit briefly, then scrub with a soft cloth or sponge. The abrasives in the baking soda will help lift the residue.

Similarly, apply a small amount of toothpaste to a soft rag or brush. Gently rub it on the residue in a circular motion. Rinse thoroughly. The toothpaste acts as a mild abrasive cleaner. Just take care not to press too hard, as abrasives can damage the finish if overused.

Prevent Future Spills

The best way to deal with Gorilla Glue on quartz is to prevent those spills and drips in the first place! Here are some tips:

  • Always work on top of wax paper or parchment when using Gorilla Glue. This catches any drips and prevents sticking.
  • Tape around the edges of the quartz with painter’s tape for added protection from drips.
  • Wipe up any spills or drips immediately before glue can dry.
  • Keep Gorilla Glue far away from quartz counters when not in use. Store safely in a drawer or cabinet.
  • When using Gorilla Glue, position your project over a workbench or table covered with wax paper.

With the right techniques and patience, you can successfully remove dried and cured Gorilla Glue off your quartz countertops without permanently damaging them. Just remember to act quickly, use gentle scraping, employ warm soapy water or mild solvents to help soften the glue bonds, and take your time working slowly and carefully. Your countertops will be saved and glue-free!

Frequently Asked Questions About Removing Gorilla Glue from Quartz Countertops

Can I use a metal scraper or knife to remove Gorilla Glue from quartz?

No, avoid using metal scrapers or knives on quartz countertops. The metal can scratch, pit, and dull the surface. Use plastic putty knives or old credit cards to avoid damage.

Will nail polish remover damage my quartz countertops?

Pure acetone nail polish remover is generally safe for quartz surfaces. Just spot test first and avoid prolonged exposure to prevent discoloration. Avoid acetone with additives, as they may damage quartz.

How long should I let solvents soak into the dried glue?

Let solvents like rubbing alcohol, acetone, WD-40 or Goo Gone penetrate the Gorilla Glue for 5-10 minutes before gently scraping. Reapply as needed until the bond softens. Don’t let solvents sit for too long.

Can I use a razor blade to scrape Gorilla Glue off quartz?

No, razor blades are too sharp and aggressive for quartz surfaces. They will likely scratch or damage the countertop finish. Always use plastic scrapers and gentle pressure instead.

Is there an easier way to remove cured Gorilla Glue?

Unfortunately the dried glue bonds tenaciously to surfaces like quartz. Patience and consistent soaking and gentle scraping is key. Trying to hurry risks damaging the finish.

How can I prevent getting Gorilla Glue on my quartz countertops in the future?

Work over wax paper or tape off surfaces with painter’s tape. Clean spills immediately. Store glue safely away when not in use. Position projects over workbenches when gluing.


While an annoying mishap, Gorilla Glue dried on quartz countertops can be removed with care and patience. Immediately soak fresh spills and gently scrape. For cured glue, use mild solvents and warm soapy water to soften the adhesive before gently prying up with plastic. Prevent future spills by being careful and preparing surfaces when using Gorilla Glue. With some perseverance, you can eliminate the sticky mess without harming your beautiful quartz!